fits 2015-2020 NISSAN Navara NP300 bonnet stripes decals stickers stripe decal

You are purchasing 2x decals
 
Consisting of 1x Passenger side bonnet & 1x drivers side bonnet decals
 
These stripes fit 2015 to 2019 NISSAN NAVARA dual cab and single cab models.
PLEASE NOTE:  Because the shape of bonnet is not flat in this particular spot it can be difficult to install this particular stripe.  We fitted these quite easily but we have fitting experience.  So we do recommend stopping at a local sign shop for the install.  Otherwise have a go yourself but we cannot take responsibility for a failed install.
TIPS:  We have added a photo of this install.  
1. lay decal out and mark with tape and pen using the inside straight edge as you start point.
2.  peel off backing, hold length ways, place inside edge down first on your guide marks, run finger along the edge pressing it down.  Then let the other side (outside edge) come down to meet the bonnet while trying to keep decal taught no allowing the middle part of decal to touch bonnet surface.  By doing this you should be able to run your finger around the remaining outside edges leaving the centre of decal floating over the deep bonnet hollow.  
3. You will then carefully cut a line through the application tape (not cutting the actual decal, only the app tape) releasing the pressure on decal and allowing you to press the rest of the stripe down working from the outside inwards.  Which is weird because normal decal application you always work inside pressing out to avoid bubbles.
4. Once all pressed down peel of app tape.  if you do get a few bubbles use razor and pin prick the corner of bubble and press out air from the opposite side.
 
This kit is in matte black high quality long lasting exterior vinyl.
 
Other colours are available upon request.